Xerox DocuPrint N4025 Information Manual page 30

Setting a SUBNET MASK at the Control Panel
Setting from
Windows or Unix
Operating Systems
2-16 DocuPrint Technical Information Guide
6
When you have completed setting the IP address, press
Enter. You will see:
E t h e r n e t M e n u
S u b n e t M a s k
7
Press On Line. You will see:
Ready
Perform these steps to enter the Subnet Mask using telnet
from a Windows or Unix OS. Some DocuPrint network
printers do not support telnet. For these printers, enter
the Subnet Mask from the Control Panel as described in
the previous section.
Telnet only works if the device is on the same subnet as the
host (i.e. computer or workstation).
1
Open a telnet session.
Windows: Open a MS-DOS window type telnet
x.x.x.x[Enter], where x.x.x.x is the IP address
Unix: Type telnet hostname in a shell
2 Type ![Enter] and then yes[Enter] to enter monitor mode.
3
Select the Network Protocols Menu, N[Enter].
4 Select the TCP/IP Options Menu, T[Enter].
5 Select the Engine Options Menu, E[Enter].
6 Type y[Enter].
7
Select Subnet mask, m[Enter].
8 Enter the new Subnet Mask, [Enter].
9 Select X [Enter] to exit this menu or end the telnet
session.