Table of Contents
Advertisement
Stick Adjustment
Adjustment・of・the・lever・length
You can adjust the length of stick levers, if you like. It
is recommended to adjust the length of the sticks in line
with your hand size.
Lever head A
[How・to・adjust・the・Stick・length.]
1. Hold the lever head "B" and turn the lever head "A"
counter-clockwise, the lock will be released.
2. Adjust the stick lever to the desired length by
turning lever head A.
Adjustment・of・the・stick・lever・angle
You can make fine adjustments to the angle of a stick lever either
inwards or outwards from the center stick position.
Screw
17
Lever head B
3. Securely lock the stick lever by holding lever head
A and turning lever head B counterclockwise.
Use the attached 1.5 mm hexagonal wrench (inside stylus)
to turn the screw clockwise to adjust the stick outwards, or
counter-clockwise to tilt it inward.
Note: Be careful not to turn the screw too far counterclockwise
as it could fall out.
→
GO to TABLE OF CONTENTS
Advertisement
Table of Contents
