Table of Contents
Advertisement
SPECIFICATIONS
(Specifications and ratings are subject to change without notice.)
Your 32MZ -WC(packaged with an S.BUS receiver) includes the following components:
• T32MZ-WC Transmitter
• R7208SB, R7308SB, R7214SB Receiver, or Receiver-less
(The receiver that comes with the product differs depending on the region where you use it, so please check the receiver you are using.)
• LT1F6600B Lithium-polymer battery & AC adapter
• Switch harness
• Tool Box (includes special jig for adjustment)
• Neck strap
• Transmitter case
The set contents depend on the type of set.
Transmitter T32MZ-WC
Operating system: 2-stick, 26 channels, FASSTest/FASST/S-FHSS/T-FHSS system
Frequency band: 2.4 GHz
RF power output : 100 mW EIRP
Power supply: 3.8 V LT1F6600B Li-polymer battery
Receiver R7208SB/ R7308SB
FASSTest-2.4 GHz system(26 ch/18 ch/12 ch mode)
S.BUS2 and S.BUS port and 8 channels for conventional system receiver
• Dual antenna diversity
• Size: 0.98 x 1.53 x 0.56 in. (24.9 x 38.8 x 14.3 mm)
• Weight: 0.35 oz. (9.9 g) R7208SB/ 0.39 oz. (11.0g) R7308SB
• Power requirement: 3.7 V to 7.4 V(Voltage range: 3.5 V to 8.4 V)
• RF power output: 25 mW EIRP
• Battery F/S Voltage: set up via transmitter
• Extra Voltage port: 0 ～ 70 V DC
Receiver R7214SB
FASSTest-2.4 GHz system(26 ch/18 ch/12 ch mode)
S.BUS2 and S.BUS port and 14 channels for conventional system receiver
• Dual antenna diversity
• Size: 1.46 x 1.98 x 0.63 in. (37.0 x 50.2 x 15.9 mm)
• Weight: 0.67 oz. (19 g)
• Power requirement: 3.7 V to 7.4 V(Voltage range: 3.5 V to 8.4 V)
• RF power output: 25 mW EIRP
• Battery F/S Voltage: set up via transmitter
• Extra Voltage port: 0 ～ 70 V DC
40
→
GO to TABLE OF CONTENTS
Advertisement
Table of Contents
