Xerox DocuPrint N2825 Install Manual page 53

UNIX
1 Use a text editor to open the /etc/hosts file.
2
Add the following line:
x.x.x.x name
where x.x.x.x is the IP address you are assigning to the
CentreDirect External Print Server (External Ethernet
Adapter)
and name is the host name.
3
Save the /etc/hosts file.
4
Create a static ARP entry by typing the following
command:
arp –s ether name 0:0:81:a:a:a (no leading zeros:
RS-6000)
arp –s name 0:0:81:a:a:a (no leading zeros: most UNIX
systems)
arpbypass set name 0x00.0x00.0x81.0xa.0xa.0xa
(AT&T and NCR)
where a:a:a is the last three number pairs for the
CentreDirect External Print Server (External Ethernet
Adapter)
address.
The assigned IP address must be on the same subnet as the
UNIX workstation.
5 Open a telnet session by typing telnet name.
6 When the telnet window appears, enter ! and then yes to
enter monitor mode.
7
Type I to enter the IP address. Enter the desired IP address.
CentreDirect External Print Server (External
8
Reboot the
Ethernet Adapter)
Appendix B: Set an IP Address
by typing R.
Quick Network Install Guide 53