Windows 2000 Network; Introduction; Preliminary Steps - Xerox DocuPrint N2825 Install Manual

Xerox docuprint n2825: install guide
Hide thumbs Also See for DocuPrint N2825:
Table of Contents

Advertisement

Windows 2000 Network

Windows 2000 Network

Introduction

Preliminary Steps

22
Quick Network Install Guide
Your printer can be installed on a Windows 2000 network
using one of three methods:
• TCP/IP protocol
• DLC/LLC protocol
• AppleTalk protocol
The Preliminary Steps given below must be accomplished
for all printers regardless of the protocol that is being used.
Then, the Quick Install Steps will detail the installation
based on the protocol used on your network.
The CentreWare DP program on your Printer
Management Software CD-ROM can also be used to
monitor and configure the printer.
1
Print the Configuration Sheet. Details are in this
document in Appendix A: Print The Configuration
Sheet. Retain this page for reference.
2
Check the Configuration Sheet and verify that both the
desired protocol and connector are enabled.
3
Proceed to the Quick Install Steps for your network
protocol.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint series

Table of Contents