SYMA X8HG User Manual page 8

Aircraft operation guidance
In order to satisfy the different
operating habits of the consumers,
this remote control is installed with
two types of different operating
modes, Mode 1 and Mode 2. Upon
starting up, press Button B towards
the right and switch on the power
supply of the remote control
simultaneously can toggle between
Mode 1 and Mode 2.
Installation steps of quadcopter's stands
Figure 1 Figure 2
1.Insert stands into the 2.Twist the wide screws
quadcopter body as to locking the stands as
figure(1). fig ure(2).
Note: Without blade protective frame,rolling effect in flight
will be better.
-7-