SYMA X8HG User Manual page 5

1. Fine-tuning of left and right side flying: After switching on the remote
control, it is displayed at the middle point.
2. Fine-tuning of forward and back: After switching on the remote
control, it is displayed at the middle point.
3. Fine-tuning of left and right turning: After switching on the remote
control, it is displayed at the middle point.
4. Accelerator Display: After frequency-matching, it is displayed at the
middle point.
5. Forward Display: When the right joystick is pushed forward, it will be
gradually ascended; the forward speed of the aircraft will be gradually
increased.
6. Backward Display: When the right joystick is pushed backward, it will
be gradually ascended; the backward speed of the aircraft will be
gradually increased.
7. Left Side Flying Display: When the right joystick is pushed to the left,
it will be gradually ascended; the left side flying speed of the aircraft
will be gradually increased.
8. Right Side Flying Display: When the right joystick is pushed to the
right, it will be gradually ascended; the right side flying speed of the
aircraft will be gradually increased.
9. Left Turning Display: When the left joystick is pushed to the left, it
will be gradually ascended; the left turning speed of the aircraft will be
gradually increased.
10. Right Turning Display: When the left joystick is pushed to the right,
it will be gradually ascended; the right turning speed of the aircraft
will be gradually increased.
11. Fast-Slow Gear Display: Press against Button A can enable the
aircraft to execute the toggle of fast-slow gear. The fast gear is H,
while the slow gear is L.
12. Power Supply Display: Display the current power capacity of the
remote control.
13. Mode Display: The default is MODE1 upon starting up. Push the
Button B to the right and switch on the power supply switch at the
same time can toggle to MODE2.
14. Signal Display: Display the strong and weak signals.
-4-