Avaya 375 Series Using Manual page 49

Disabling the Bluetooth connection
Procedure
1. Press Menu.
2. Select Connections.
3. Select Bluetooth.
4. Select Disable.
The handset displays the Bluetooth disabled message.
Pairing and connecting a Bluetooth headset
About this task
To use a Bluetooth headset, pair it first with the handset. You only need to pair the Bluetooth
headset once.
The handset automatically connects with a paired headset when it is in the range. The
front of a headset name indicates an established connection.
If the connection with a headset is lost, the handset tries to reconnect. The pause between
attempts starts from 1 second then it increases after each failed attempt by 1 second. After
approximately10 minutes, the pause between attempts reaches 30 seconds and does not
increase more. If a connection is not restored within 2 hours, the handset stops the reconnecting
process.
Procedure
1. Place the Bluetooth headset and the handset next to each other.
2. Set the Bluetooth headset in pairing mode.
3. On the handset, enable Bluetooth.
4. On the handset, select Connections > Bluetooth > Headset > Add new.
The handset displays the Put headset in Pairing mode message.
5. Press OK.
The handset searches for a Bluetooth headset for connection.
6. When the headset is found, press Pair.
7. (Optional) If required, enter the PIN code.
8. Press OK.
If the pairing is successful, the handset displays the Successful pairing message.
The headset is connected and indicated by a colored square (
name.
9. To add another headset, repeat steps 1 to 6.
August 2023 Using Avaya Wireless Handset 375x
Comments on this document?
Connections
icon in
) in front of the headset
49