Avaya 375 Series Using Manual page 23

3 Multifunction button 2
4 Colour display
5 Navigation key
6 On-hook and On/Off key
7 Sound off key
8 Microphone
9 Space
9 Multi-purpose connector
10 Key lock and Upper/Lower case key Is used to lock the keypad in combination with the
11 Voice mail access
12 Off-hook key
13 Soft keys
August 2023
You can use the Multifunction button to configure
different functions. Long and multiple presses are
required to use this feature.
By default, only multiple press is configured to put
the device to sleep.
Note:
Once configured, the button is used
specifically as a PTT button.
The full graphic type of display is a 2.4-inch TFT
full-color display. The display has multiple colors
and backlighting.
Use the Navigation key for stepping left or right,
and up or down in the menu. You can program the
Navigation key for shortcuts.
Is used to end a call, return to idle mode, and
switch the handset on or off by long press.
Is used to turn on or off audible signals in idle
mode, silencing the ring signal at incoming calls
and to mute in the call.
During a call, a long press on the button changes
the microphone on or off.
The microphone is located on the front bottom side
of the handset. Is used in voice communication.
Is used to add space between text.
The connector is used for battery charging,
software download, configuration and connection
of an IP 65 classified headset connector.
soft key "Lock". This key is also used for switching
between upper or lower case and digits.
A quick access to the handset's voice mail. This is
a system-dependent feature.
Is used to answer a call, to pre-dial a number, and
as a shortcut to the Call list.
The three Soft keys are located just beneath the
display.
The function of each Soft key is indicated by text in
the display just above the keys. In idle mode, user
can use the Soft key for specific functions defined
by the user of the handset.
Using Avaya Wireless Handset 375x
Comments on this document?
Physical layout
Table continues...
23