Xerox DocuColor 5252 Administration Manual page 16

To o l s M o d e
2 - 1 6
To access the calibration procedures:
1
Touch the Auto Color Calibration button from the Machine
Defaults 1 screen. The Auto Color Calibration screen appears.
2
From this screen, you can perform the following tasks:
• Run Calibration
• Check Gradation
• Manual Adjust
Key point: Touch the Reset button on the Auto Color Calibration
screen to return any settings you changed to their last saved
values. Once you exit Tools Mode, any changes you have made
are set.
Refer to the following procedures for detailed information
regarding each option displayed on this screen.
D o c u C o l o r 5 2 5 2 S y s t e m A d m in is t r a t i o n G u i d e