Xerox DocuColor 5252 Administration Manual page 76

To o l s M o d e
Carbonless Media
Enablement
2 - 7 6
Under most conditions, this feature is not used by system
administrators; however, there are limited circumstances under
whic this feature is used. These circumstances include:
Carbonless papers are coated with several functional coatings
which promote the image transfer through the form set and enable
the form sets to separate appropriately after padding with a
special adhesive. Each supplier of xerographic carbonless paper
has developed their own unique chemistry, which is why the
following procedure enabling this application, works best with
Xerox Premium Digital Carbonless Paper.
In order to avoid problems when running carbonless media, you
may use the NVM Read/Write feature to switch on the Carbonless
Media feature in order to reliably run carbonless media.
Caution: Do not enter any numbers on this screen other than
the ones described in this procedure. Entering and saving
numbers, other than the ones described, changes the system
settings which may result in a service call to restore the system to
the correct settings.
Use the following procedure to switch on a feature:
1
From the NVM Read/Write screen, use the keypad on the Control
Panel and enter the Chain Link Number:
• The Chain Link Number for Carbonless Media is 700 656.
2
After entering the desired Chain Link Number, press the Start
button on the Control Panel. The UI displays this screen:
D o c u C o l o r 5 2 5 2 S y s t e m A d m in is t r a t i o n G u i d e