Run Calibration - Xerox DocuColor 5252 Administration Manual

To o l s M o d e

Run Calibration

Use the Run Calibration feature if it is visually obvious that the
gray balance on your scan to print jobs is not correct. During the
Run Calibration procedure, the digital press creates a Look Up
Table by reading the 12 Toner Density Patches that print out. The
digital press then compares those readings to the factory-set
target values and makes the necessary adjustments to bring the
values within the target range.
Note: PG is an abbreviation for Pattern Generator. The R in
200R indicates Rotated Line screen, and the C in 200C and 150C
indicates Cluster Dot screen.
1
Touch the Run Calibration button on the Auto Color Calibration
screen to begin the calibration process. The Run Calibration
screen appears.
D o c u C o l o r 5 2 5 2 S y s t e m A d m i n i s t r a t i o n G u i d e
2-17