Xerox DocuColor 5252 Administration Manual page 51

Tools mode

Hide thumbs Also See for DocuColor 5252:

Table of Contents

D o c u C o l o r 5 2 5 2 S y s t e m A d m i n i s t r a t i o n G u i d e

Output 10 duplex prints and compare the registration mark or

reference point on side one to side two. Discard the first few

prints, as inconsistency tends to be greater with these images. If

there is misregistration, continue with this procedure.

Measure the distance between the registration point and the edge

of the paper on both the lead edge (Y) of the paper and the side

edge (X).

Refer to the Measuring Misregistration figure below. The solid line

registration marks indicate the reference point on side one. The

dotted lines indicate the reference point on side two.

Side Edge

of paper

Paper Feeding

Direction in the

Lead Edge

of paper

Misalignment of

reference point on side 1

to side 2 (X)

Misalignment of reference

point on side one to side 2 (Y)

To o l s M o d e

2-51

Table of Contents