Table of Contents
Advertisement
Cleaning agent and rinsing agent
Power supply connection for DOS 1,
cleaning agent (depending on the model).
Power supply connection for DOS 4, rins-
ing agent.
Connections for dispensing hoses.
Damage caused by incorrect voltage.
Before fitting the dispenser module, com-
pare the connection data (voltage and fre-
quency) on the data plate with that on the
data plate of your machine. If the data
does not match, the module could sustain
damage.
If in any doubt, consult a qualified electri-
cian.
Connect the module to the machine's
power supply.
To connect the dispensing hose, release
the hose clip on a free connector and re-
move the safety cap.
Push the dispensing hose onto the con-
nector and secure it with a hose clip.
Blank off unused connectors for dispens-
ing hoses with safety caps to prevent the
leakage of wash water.
32
Process chemicals
Only use cleaning agent suitable for com-
mercial dishwashers.
Suitable products are available from the
Miele Professional product range.
Cleaning agent can be dispensed in powder
form, as a tab, or in liquid form.
Powder cleaning agent and tabs are dis-
pensed via the door dispenser with the
symbol.
Only use cleaning agent tabs that are
quick-dissolving. Suitable tabs are avail-
able from the Miele Professional product
range.
Filling the door dispenser
Risk to health due to dust production.
When dispensing powder cleaning agents
and tabs, dust from fine cleaning agents
can be stirred up. If this dust gets into the
mouth, throat, or eyes, it can cause irrita-
tion or burns.
When dispensing powder cleaning agents
and tabs, avoid the production of dust as
much as possible.
Add powder cleaning agent or a tab to the
powder cleaning agent dispenser before ev-
ery wash program (except
activation
Drain
, and
Rapid
program.
Press the yellow button on the dispensing
canister with the symbol.
The flap will spring open. The flap is always
open at the end of a program cycle.
Rapid
Cold
Re-
,
,
). Follow the tips on the
Advertisement
Table of Contents
