Table of Contents
Advertisement
Very hot steam may escape when opening the lid after
cooking. Lift the lid at the rear, so that the hot steam
can escape away from you.
Fish can also become crispy in a covered roasting dish.
Here, use a roasting dish with a glass lid and set a
higher temperature.
Steam- assisted roasting
Certain dishes become crispier if cooked using steam,
and do not dry out as much.
Use uncovered cookware. Cookware must be heat- and
steam-resistant.
The fish does not have to be turned.
Use steam-assisted cooking if it is indicated in the
settings table. Some dishes turn out best if they are
cooked in several stages. These are indicated in the
table.
Steaming
The fish is cooked more gently using the steaming
function, and remains particularly succulent.
Larger pieces require a longer heating-up time and a
longer cooking time. If you are using several pieces
which are the same weight, the heating-up time is
increased, and not the cooking time.
Fish does not need to be turned.
Use the perforated steam container, size XL, and slide
the universal pan in underneath. You can also use a
glass tray and place this onto the wire rack.
Food which would normally be prepared in a water bath
should always be covered with foil.
Meat thermometer
You can cook accurately using a meat thermometer.
Read important notes on using the meat thermometer in
the corresponding chapter. There, you can find notes
on inserting the meat thermometer, the possible heating
types and additional information. ~ "Meat
thermometer" on page 22
Dish
Fish
Fish, grilled, whole 300 g, e.g. trout
Fish, fried, whole 300 g, e.g. trout
Fish, steamed, whole 300 g, e.g. trout Steam container
Fish, grilled, whole 1.5 kg, e.g.
salmon
Fish, steamed, whole 1.5 kg, e.g. cod Steam container
* Preheat
** Slide the universal pan in underneath at shelf position 2
Accessories/cookware
Wire rack
Universal pan
Wire rack
Tested for you in our cooking studio
Recommended setting values
You can find the ideal heating type for your fish dishes
in the table. The temperature and cooking time depend
on the amount, composition and temperature of the
food. Settings ranges are indicated for this reason. Try
using lower setting values first. You can use a higher
setting next time if necessary.
The setting values are based on the assumption that
chilled fish is placed into a cold cooking compartment.
By doing so, you can make energy savings of up to 20
per cent. If you preheat the oven, you can reduce the
indicated cooking times by several minutes.
In the table, you can find information for fish with default
values for the weight. If you want to cook a heavier fish,
you should definitely use the lower temperature. If
cooking several fish, you should use the weight of the
heaviest fish as a reference for determining the cooking
time. The individual fish should be approximately the
same size.
As a general rule: the larger a fish, the lower the
cooking temperature and the longer the cooking time.
Turn any fish which is not in swimming position after
approx. ^ to Z of the indicated time.
Only use greaseproof paper that is suitable for
Note:
the selected temperature. Always cut greaseproof
paper to size.
Remove unused accessories from the cooking
compartment. This will achieve the best possible
cooking results and energy savings of up to 20 per
cent.
Types of heating used:
< 4D hot air
■
% Top/bottom heating
■
7 Circulated air grilling
■
( Grill, large area
■
S Steaming
■
The levels of steam intensity are indicated as numbers
in the table:
1 = Low
■
2 = Medium
■
3 = High
■
Shelf posi-
Type of
Temperature in
tion
heating
°C/grill setting
2
170-190
7
2
170-180
<
160-170
3
80-90
S
2
170-190
7
3
80-90
S
en
Steam in-
Cooking
tensity
time in
mins.
-
20-30
1
15-20
-
5-10
-
15-25
-
30-40
-
35-50
55
Advertisement
Table of Contents
