7. Connect supplied 3/8" water line between
water supply and water inlet fitting (Fig. 11.1).
8. Using supplied 3/4" drain tubing and barbed
fittings, connect 3/4" barbed drain elbow fitting
on dispenser to 3/4" FNPT drain (Fig. 11.2).
9. Route power cord through utility access hole
to power supply (Fig. 11.3).
10. Turn on water supply and check for leaks.
11. Install bottom panel (Fig. 12).
10
25CI425A/W, 25HI425A, 50CI425A/W, 50HI425A
Fig. 11 – Dispenser bottom view
1
2
3
Fig. 12