Registering For E-Series - Bosch DSA-N2E7X2-08AT Installation Manual

12 en | Registering for E-Series
3

Registering for E-Series

Before you begin the installation, register your E-Series storage system by using the
registration form shipped with the system. The enclosure serial number is located on two
places on each enclosure: the large UL label attached to the top of an enclosure, and a silver
label attached to the front of the enclosure, either on the bottom lip or the right ear. In both
of these places, the enclosure serial number is identified by the text "Serial " or "S/N ".
Record the serial number of the integrated controller-drive tray for later use. This serial
number is required to initiate any support request for your system.
Notice!
The SANtricity® Storage Manager software is also referred to as the storage management
software.
2016.12 | V2.1 | DOC Installation manual
DSA E-Series (E2700)
Bosch Sicherheitssysteme GmbH