Usb-A Connector Usb2 - HP E24u G4 Maintenance And Service Manual

2) Lift the USB-B connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
Solder the new component

USB-A connector USB2

Repair the USB-A connector:
1) Use a hot air gun and a soldering iron to remove as much solder as possible from the pin.
2) Lift the USB-A connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.
16