Usb-A Connector Usb2/Usb3; Usb-A Connector Usb4/Usb5 - HP Z24u G3 Maintenance And Service Manual

2) Lift the RJ45 connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
Solder the new component

USB-A connector USB2/USB3

Repair the USB-A connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Lift the USB-A connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.

USB-A connector USB4/USB5

Repair the USB-A connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Lift the USB-A connector from the PCB.
21