Usb-A Connector Usb2/Usb3; Usb-A Connector Usb4/Usb5 - HP Z24f G3 Maintenance And Service Manual

3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
Solder the new component

USB-A connector USB2/USB3

Repair the USB-A connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Lift the USB-A connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.

USB-A connector USB4/USB5

Repair the USB-A connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Lift the USB-A connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.
20