Power Board - HP E24u G4 Maintenance And Service Manual

5) Release all the screws. Remove middle cover and bracket.
6) Remove the safety Mylar, then release the seven screws from the interface BD and power BD
7) Remove the power BD and Interface BD from the bracket

Power board

The power board part number is 755.A2403.A001.
Before removing the power board, follow these steps:
Prepare the monitor for disassembly. See Preparation for disassembly on page 10.
▲
Remove the power board:
1) The HP E24u G4 power board connector position is as follows:
12