Table of Contents
Advertisement
ADS9817EVM Software Reference
6 ADS9817EVM Software Reference
6.1 ADS9817EVM Software Installation
This section details the installation and operation of the ADS9817EVM software graphical user interface (GUI).
This software requires the TSWDC155EVM (sold separately) controller to operate. The first steps to installing
the software (as shown in
and Software folder of the ADS9817EVM, and run the GUI installer to install the EVM GUI software on the
computer. Accept all the license agreements and choose the destination location, project directory, and start
menu. Typically, the default values work, but these values can be customized as needed based on the user's
requirements.
12
ADS9817 Evaluation Module
Figure
6-1) is to download the latest version of the EVM GUI installer from the Tools
Figure 6-1. Initial Software Installation
Copyright © 2023 Texas Instruments Incorporated
SBAU416A – NOVEMBER 2022 – REVISED JULY 2023
Submit Document Feedback
www.ti.com
Advertisement
Table of Contents
