Making Copies On The Xc351 - Xerox XC351 User Manual

Making Copies on the XC351
The Auto Start feature allows you to program the copier while it is warming
up. You can select the exposure setting, insert a sheet of paper, and walk
away from the copier. Copying will start automatically as soon as the
copier is warmed up.
1. Turn the power on.
2. Open the document cover.
3. Place the originalface down, between the
marks, in the upper right corner of the
document glass.
4. Set the paper guide to the width of the
copy paper.
Insert a sheet of copy paper into the paper
feed slot.
. Copying will start automatically.
. Approximately 90 seconds after the last
copy is made the copier enters the auto
power saver mode and the Ready
indicator starts flashing. Copying is
possible in the Auto Power Saver Mode,
but the first copy may take a few
seconds longer than usual.
Remove the copies one at a time.
. Wait for the ready indicator to light
before inserting the next sheet of copy
paper.
. Approximately 1 minute after the last
copy is made, the exposure setting will
return to the auto mode.
6 .
1 3