Xerox DocuColor 3535 Installation Manual page 43

1
1-27 Setting up PostScript printing with Windows NT 4.0
3. Double-click the name of the Fiery to display enabled print connections.
4. Double-click the name of the connection you want to print to.
The Printers dialog box appears, asking whether you want to set up the printer.
5. Select Yes to complete the installation for the selected connection.
Windows NT 4.0 downloads the printer driver and printer description files from the
Fiery to your computer and installation is complete.
If the server does not have a driver to install, use the following steps to finish the setup.
6. Click OK in the Connect to Printer dialog box.
7. In the dialog box displaying lists of manufacturers and printers, click Have Disk.
The Install From Disk dialog box prompts you for the disk.
8. If you are installing from the User Software CD, insert it into the CD-ROM drive. Type
the name of the CD-ROM drive (for example, D:\) and click Browse.
If you are installing from files you downloaded using the Installer WebTool, type the
name of your hard disk drive (for example, C:\) and click Browse.