Xerox DocuColor 3535 Installation Manual page 37

1
1-21 Setting up PostScript printing with Windows NT 4.0
T TCP/IP LPR
O SET UP AND
1. Open the Properties dialog box for the Fiery and click the Ports tab.
2. Click Add Port.
The available port types are displayed.
3. Select LPR Port and click New Port.
If the LPR port is not listed, install the TCP/IP network protocol and
Microsoft TCP/IP printing software (see your Windows documentation).
4. Type the IP address of the Fiery.
If your network uses Domain Name Services (DNS), enter the DNS name assigned to
the Fiery instead of the IP address.
5. Type one of the following printer names, depending on the Fiery connection you want
to print to.
print
hold
direct
W NT 4.0
PRINTING FOR INDOWS