Stop The Copy Job; Basic Copying - Xerox CopyCentre 133 Quick Reference Manual

The queued copy job will be displayed. If no job is displayed on the touch screen, it may
have already been processed.
For more information, refer to Current and Pending Jobs in the Job Status chapter on
User Guide.

Stop the Copy Job

Follow the steps below to manually cancel the activated copy job.
1.
Select [Stop] on the touch
screen or press the <Stop>
button on the control panel to
suspend the current copy job.
NOTE: Select the <Start> button on
the control panel to resume the
suspended copy job.
2.
If required, press <Job Status>
button to display the [Job Status]
screen. To exit the [Job Status]
screen, press the <Features>
button.
3.
Press the <C> button on the
control panel to delete the
suspended copy job.

Basic Copying

This section describes the basic features for a copy job on the [Basic Copying] screen.
For information on the features available, refer to the following.
Reduce/Enlarge – page 42
Paper Supply – page 43
2 Sided – page 45
Copy Output – page 46
1.
Press the <All Services> button
on the control panel.
2.
Select [Copy] on the touch
screen. Ensure that the [Basic
Copying] screen is displayed.
3.
Select the required option.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide
Basic Copying
<Stop> button
<C> button
41