Xerox CopyCentre 133 Quick Reference Manual page 109

9 Problem Solving
The Finisher does not stack output correctly.
Pages in the set are not stapled.
Paper delivered to an output tray is not
properly stacked up.
Paper curls.
Cannot store a document for secure polling
due to full memory.
108
Symptom
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide
Recommendation
• Check that the paper tray guides are
locked into position against the paper.
• Check that the paper tray guides are
locked into position against the paper.
• Flip over the paper stack in the paper tray,
or rotate it head to toe.
• Check that the paper is loaded correctly.
Load paper in Trays 1, 2, 3 and 4 seam
side up.
• Load paper in the Tandem Tray Module
and bypass tray seam side down.
• Load custom media in the bypass tray.
• Refer to the Paper and Other Media
chapter for procedures.
• Cancel the operation and try again later
when additional memory is available.