Related Manuals for REMKO MKT 350/2
Summary of Contents for REMKO MKT 350/2
- Page 1 MKT 350/2 Portable Air Conditioner Operation Technology Spare Parts Edition GB – T05...
-
Page 3: Table Of Contents
Our guarantee becomes null and void if the unit is used, set up or maintained improperly, or if modifications are made to the supplied unit without our prior consent. Subject to alterations! Portable Air Conditioner MKT 350/2 Contents Contents Page Page... -
Page 4: Safety Instructions
Safety Instructions Do not transport the unit during operation. Extensive tests have been conducted on the material, functionality and quality of the portable air conditioner Do not place the unit on its side. to ensure that it is a high-performance unit with a long service life. -
Page 5: Description Of Device
The unit has been designed for automatic, universal, smooth air dehumidification. Its compact dimensions The MKT 350/2 air conditioner comes with an infrared remote control and an air outlet hose with a flat make it easy to transport and set up in all rooms. - Page 6 Control Panel 5 “TIMER” button 1 “I / 0” button This button is used to automatically activate the unit The unit is switched on or off with button 1. to switch on and off. When the unit is off, the Timer 2 “MODE”...
- Page 7 Infrared Remote Control Functions 12 “DRAIN WATER” display All settings can also be made using an infrared remote This light indicates that the floating switch of the control. A description of the button functions can be internal tank has switched off unit operation. The found in the “Control Panel”...
-
Page 8: Prior To Initial Operation
Expelling the warm air Prior to Initial Operation During cooling mode, the unit generates warm air. This air must be expelled from the room to retain the cooling The unit is set up in the desired location with the air out- effect. -
Page 9: Initial Operation
Initial Operation Information about timer mode (timer clock) Prior to initial operation, the air intake and outlet open- The timer function is reset by pressing the “I/O” but- ings must be inspected for foreign bodies and the air in- ton. take filter for dirt. -
Page 10: Maintenance And Service
Maintenance and Service Cleaning the Filter Regular maintenance and observance of some basic The unit is equipped with two air intake filters. These principles are required to ensure a long service life and can be removed from the back of the unit. The filters to keep the unit functioning properly. -
Page 11: Troubleshooting
Troubleshooting This unit has been designed using state-of-the-art manufacturing processes and it has been tested repeatedly to ensure that it is working properly. However, should problems occur, refer to the following list. Problem Possible cause Check Remedy The unit does not start or Are all other electrical compo- Check current and wait for the Power failure. -
Page 12: Technical Data
Technical Data Type designation MKT350/2 Nominal cooling capacity 3.45 Energy efficiency class cooling Energy efficiency ratio EER 2.63 Dehumidification capacity max. Operational area (size of room), approx. m³ 18 to 35 / 35 to 85 Operating range indoor unit ° C / % r.F. R 407 C Refrigerant Operating pressure max., refrigeration cycle... -
Page 13: Exploded View
Exploded View Spare Part List No. Description Ref. No. No. Description Ref. No. MKT 350 MKT350 19 Microswitch 2 (tank) 1107019 Cover, front 1107000 20 Evaporator 1107020 Recessed grip 1107001 21 Compressor cpl. 1107022 Control panel cover 1107002 22 Control panel foil 1107023 Air outlet grille 1107003... - Page 14 Installation Diagram of the Wall-Lead Through Back pressure flap Safety guard Sealing cap min. 400 mm Telescope pipe Installation instructions 1. Create a core hole in the outer wall (maximum wall 4. Attach the safety guard to the outer side of the wall thickness 480 mm) with a diameter of at least 135 with 4 screws.