Cab-1 Commands For Your Commodore; Railsounds In The Command Environment - Lionel 777 Commodore Vanderbilt Hudson Instruction Manual

CAB-1 commands for your Commodore

h
uDson
r
aiLsounDs eFFeCts
C
oupLer reLease
.
sounDs
Rear tender
coupler releases.
C
oupLer reLease
Press AUX2 to turn
your Commodore' s
headlight on and off.
Turn the THROTTLE to
the right to accelerate,
left to decelerate. s
peeD
DepenDent variaBLe
steam ChuFFing
D C
yna huFF DynamiC
Press HALT to shut down all
PowerMaster electrical
output on your railroad.
Stops all Command-
HALT
equipped Lionels in oper-
ation.

Railsounds in the Command environment

Y
our Commodore's Railsounds system
gives you even more in the
TrainMaster Command environment.
TM
• DynaChuff . Real steam locomotive chuff-
ing depends on the locomotive's load.
DynaChuff simulates both labored and
relaxed chuffing sounds. Highball down the
mainline and hear the labored chuffing of a
locomotive battling inertia. Reduce your
throttle setting, and chuffing relaxes to a
-
.
more sedate sound, as though the load
placed on the Commodore has decreased.
Experience DynaChuff on steep grades, at
yard crawls, and at speed. Another Railsounds
exclusive.
• Bonus sounds like squealing brakes with
the CAB-1 BRAKE command.
• Incidental sounds you control with CAB-1
numeric keypad commands, like steam
letoff and steam release effects.
Press WSTL/HRN to activate
the Commo-dore' s
whistle, release to discon-
tinue. m -w
uLti histLe
.
steam whistLe sounD
Press BELL once to
activate the bell, again
to discontinue.
t
raDitionaL BeLL
Press DIR—the locomo-
tive decelerates to a
complete stop; turn the
throttle up, and the loco-
motive moves in the
opposite direction. t
here
. s -
is no neutraL team air
.
reLease sounD
Press and hold BOOST for
extra power. Release
BOOST and return to the
locomotive' s previous
speed. L
aBoreD ChuFF
Press and hold BRAKE to
slow down or stop.
Re-lease BRAKE and return
to the previous speed.
s .
queaLing Brake sounDs
9