2
Mounting the terminal
Mounting the terminal
Most of the REx 5xx terminals can be rack, flush, semi-flush or wall mounted with the use of
different mounting kits. An additional box of type RHGS can be mounted to one side of a 1/2 or
3/4 terminal. The 19-inch 1/1 wide terminal cannot be semi-flush mounted because the mount-
ing distance frame will cover the ventilation openings at the top and bottom.
A suitable mounting kit is available. Mounting kits include instruction sheets and all parts need-
ed including screws. The following mounting kits are available:
•
19-inch rack mounting kits, 1/2, 3/4 and 1/1 terminal width variants.
2.1 "Mounting in a 19-inch rack".
•
Side-by-side mounting kit.
additional box type RHGS".
•
Flush mounting kit.
See section 2.3 "Mounting in a flush or semi-flush installa-
tion".
•
Semi-flush mounting kit.
stallation".
•
Wall mounting kit.
See section 2.4 "Mounting on a wall".
See section 2.2 "Mounting in a 19-inch rack with an
See section 2.3 "Mounting in a flush or semi-flush in-
Chapter 5
Installing the terminal
See section
25