MAJORITY Fitzwilliam 3 User Manual page 30

FM Radio Operation
EN
Station Name / Frequency
When an RDS station is received, the name of that station will be displayed. If this info
is not available, then the frequency will be displayed.
Date
Displays the current date provided automatically by the broadcaster.
Scan Setting
Press the MENU button to access FM Mode menu.
1.
Press 1 2 w s 3 buttons to select Scan Setting, then press the SELECT button
2.
to enter.
Press 7 / 8 buttons to select [Yes] to receive strong signal only, then press
3.
the SELECT button to confirm.
Audio Setting
1. Press the MENU button to access the FM Menu.
2. Press 1 2 w s 3 buttons to select Audio Setting then press the SELECT
button to enter.
3. Press 7 / 8 buttons to select [Yes] to listen in mono only or [NO] to let the
unit automatically select Stereo or Mono.
4. Press the SELECT button to confirm.
Alternatively, press the MONO/ST. button on the remote control to toggle between
the Mono only or Mono/Stereo selection.
Saving and Recalling Preset Station
Refer to 'Preset Stations' and 'Recalling a Stored Station' under Internet Radio
•
section for instruction at (p.18).
30