MAJORITY Fitzwilliam 3 User Manual page 17

Privacy Policy
1. To view the Privacy Policy page, press MENU and go to System Settings -
Privacy Policy.
After 'Factory reset', you need read and once more, agree with the privacy
2.
policy.
Backlight
1. While in System Settings Mode, press 1 2 w s 3 buttons to select Backlight,
and then press the SELECT button to enter.
2. To view Backlight settings, press 1 2 w s 3 buttons and select any of the
following options. Press the SELECT button to confirm.
Operation Mode Backlight
Standby Mode Backlight
Alternatively, press the DIMMER button on the remote control repeatedly to adjust the
Backlight level under ON mode or in Standby Mode.
If 'Timeout' is set as OFF, the display brightness in standby will be the same as in the
operation mode, and you will not be able to use the DIMMER button on the remote
control.
System Settings
High / Medium / Low
Timeout: Off/ 10 sec/ 30 sec/ 60 sec
Standby Level: High/ Medium/ Low/ Off
EN
17