Position Documents; Customize The Function Buttons - Microtek XT3500 Quick Start Manual

Position Documents

1. Raise the scanner lid.
2. Place the document to be scanned facing down
on the glass surface of the scanner. Align the
top of the document along the horizontal ruler
on the scanner, using the arrow printing mark
on the horizontal ruler as a point of reference.
3. Lower the scanner lid.

Customize the Function Buttons

The XT3500 is equipped with 3 programmable function buttons (Scan/F1, Copy/F2, and
OCR/F3) that can be customized to automate a number of predefined operations, such as
scanning to a file, sending an image to your printer or e-mail account, scanning for OCR,
etc. Customizing is done through the Scanner Button Settings interface in the ScanWizard
DI, refer to the scanner's User's Manual for more details.
NOTE: To scan a book or thick
documents, you may lift the scanner
lid out of its hinge sockets. Then,
align the inner margin of a book along
the edge of the scanner glass surface
as indicated in the graphic, using the
arrow printing mark on the horizontal
ruler as a point of reference.
• Scan (F1), Copy (F2), and OCR (F3) :
Customizes the function buttons to perform
your preferred functions.
F1
SCAN
F2
COPY
F3
OCR
3