Microtek XT3500 Quick Start Manual page 5

5. Click the Show Preview Window and Show Setting Window tabs in the Scan Setup
interface to display other interfaces which are helpful for your scanning processing.
6. Click the Preview button to perform a preliminary view of the entire image. When
done, a preview image appears in the Preview window.
7. Go to the General panel by clicking the General tab in the Settings window. Specify
the settings for your requirements there.
a) Select the image type in the Document Type as your input image type.
– Select Photo to scan color prints.
Select Text to scan text.
–
b) If necessary, check Remove Blank Page and Remove Punch Hole to enhance the
quality of the scanned images.
8. If necessary, go to the Image Process panel by clicking the Image Process tab in the
Settings window. Use the image correction tools presented there to enhance the
image quality according to your specific requirements.
9. Click the OK button to close the Scan Setup interface and return to the Main interface
of ScanWizard DI.
10. In the Main interface, click the File Format menu button to select a file format for the
scanned images.
11. In the Main interface, click the File Name menu button to specify a file naming method
for the scanned images.
12. In the Main interface, select and click the Normal Scan button to start scanning.
When done, the scanned images will be automatically saved into the folder defined in
the File Location menu box. At the same time, the scanned images will be displayed
in thumbnail sizes in the Thumbnail View window and labeled with the file name and
file format specified earlier.
13. Click the Open Folder button to locate the scanned images if you want to view.
5