Advertisement
Hardware Installation
1.
Turn Off the power to your computer.
2.
Unplug the power cord and remove your computer's cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
To install the card, carefully align the card's bus connector with
the selected PCIe slot on the motherboard. Push the board down
firmly.
5.
Replace the slot bracket's holding screw to secure the card.
6.
Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows® 2000
1.
Insert the Driver CD into the CD-ROM drive.
2.
At the Found New Hardware Wizard, click Next.
3.
Select Search for a suitable driver for my device
(recommended), and click Next.
4.
Check CD-ROM drives, uncheck the other boxes, then click
Next.
5.
Click Next.
6.
Click Finish to complete the driver installation.
Page 3
Advertisement
