Table of Contents
Advertisement
6.0 Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your
computer's cover.
3. Remove the slot bracket from an available PCIe
X16 slot.
4. To install the card, carefully align the card's bus
connector with the selected PCIe slot on the
motherboard. Push the board down firmly.
*The PCI Express USB3.1 Card must be connected
the SATA power cable to SATA power jack
5. Replace the slot bracket's holding screw to
secure the card.
6. Replace the computer cover and reconnect the
power cord.
5
Advertisement
Table of Contents
