Table of Contents
Advertisement
B-TEC warrants its products to be free from defects in materials and workmanship, for a period of 24
months on a one shift basis. In case of exceptional usage such as multiple-shift operation, the statutory
warranty is shortened to 12 months (two-shift operation) or 8 months (three-shift operation). The
period starts from the date the device is shipped from the factory. Emitter tubes are excluded from
warranty. The guarantee expires prematurely if the customer or a third party undertakes inappropriate
modifications or repairs or if the customer, in case of a defect, does not immediately take all appropri-
ate steps to mitigate the damage and give the supplier the possibility of remedying such defect.
2. Safety Requirements
The manufacturer is not liable for damages caused by changes of the device that have
not been specifically authorised by the manufacturer. The removal or alteration of
safety devices immediately voids the warranty and is an infringement of European
safety standards.
The device is built according to the state of the art and can be operated safely. However, this does not
mean that the consequences of all operational failures are protected by technical measures. Dangers
can arise from this device if it is used improperly or incorrectly. However, additional organizational
measures have to be taken into account through certain workflows.
The manufacturer is not reliable for damages caused by the following situations:
•
Disregarding the instructions described in the operating manual.
•
Changing technical product parameters.
•
Changing or disabling safety facilities.
Read the operating instructions and safety requirements carefully before
putting the device into operation and follow the instructions carefully!
2.1. Working Area
•
It is not allowed to use this device in an explosive or combustible environment; otherwise it may
lead to fire.
•
In case the device is used in a spray booth, the air must be exchanged/purified before use.
•
Be careful of uneven floor when moving the device to avoid any overturn.
•
Avoid any accident caused by random placement and dark lights. Please keep the site clean with
enough light.
•
Do not use this device when it is rainy or damp. Water coming into the device may lead to electric
shock or damage to the device.
•
For outdoor use, please use the outdoor-specific cables marked with "W- A" or "W" for avoidance
of electric shock.
•
Do not use this dryer in wet areas such as bathrooms or swimming halls. Keep the working site
dry.
•
Keep the working area clean and free of any obstructions, oil, waste article or other broken parts.
IR-B06 / IR-B06-T
Page 2
Advertisement
Table of Contents
