Important Information; Safety Regulations And Maintenance Advice; Work Area - B-TEC IR-B01 Manual

1. Important Information

Thank you for purchasing this B-TEC Systems infrared paint curing unit IR-B01.Please note,
the unit has a rating plate attached which includes the model and serial number. Should you
ever need service or parts, please provide that information when calling B-TEC Systems, or
your distributor.
This short wave infrared paint dryer is specially made for baking automotive refinish coatings.
Its energy penetrates deep into the coating, ensuring not only a short baking time, but also
producing excellent through curing of the coating. Each bake cycle only costs a few cents,
making it highly efficient. The unit is built to last and its design offers the user great flexibility
to deal with all the various curing jobs on a motor vehicle.
B-TEC SYSTEMS equipment has been built to the highest quality standards to ensure
reliability. In order to get the best, safe use of this equipment, please read these
instructions thoroughly before commencing assembly or operation of the machine. Failure
to do so could result in damage or injury for which B-TEC Systems will accept no
responsibility or liability.

2. Safety Regulations and Maintenance Advice

B-TEC SYSTEMS equipment is designed to be used for the purpose explicitly described
below. Any other use is in contrast with the regulations. The manufacturer cannot be held
liable for damages resulting from such non-regulatory use. Improper use can endanger the
health of the operator and of others and cause damage to the machine itself or to other
materials and assets.
There is no liability for damages or injuries resulting of the following situations:

Not complying with the instructions given in this manual

Changes of technical product specifications

Changes or breaking the safety devices

2.1 Work Area


Do not use this equipment in an explosive or combustible environment; as it could lead
to fire.

Use caution when moving the equipment over uneven floors to avoid tipping over or
damage to the emitters.

Keep the working area clean and free of any obstructions.
4