Table of Contents
Advertisement
EU-Declaration of Conformity According to DIN EN ISO/IEC 17050-1
Manufacturer: B-TEC GmbH
Zunftweg 6-8
D-31303 Burgdorf / Ehlershausen
Herewith, we declare that the devices and marketed models described in the following conform in
conception and in design to the relevant fundamental safety and health requirements of the applicable
directives. This object of conformity is issued under the sole responsibility of the manufacturer. The
object of the declaration is in conformity with the relevant Union harmonisation legislation.
If you modify the device without our explicit agreement, this declaration will be invalidated.
Type of equipment: Paint drying equipment
Type designation:
IR-B06
Serial number:
______________________
Year of construction: 20___
Parameters:
Tested according to:
This EU-Declaration of Conformity is issued on a voluntary basis according to the Low Voltage Directive
2014/35/EU relating to electrical equipment designed for use within certain voltage limits. It confirms
that the listed equipment complies with the principal protection requirements of the directive.
Responsibility for technical documents: Michael Bellroth, Christian Bellroth
Address: Refer to manufacturer´s address
Place, date, signature of manufacturer:
Function of the signer: Managing director
B-TEC GmbH • Zunftweg 6-8 • D-31303 Burgdorf / Ehlershausen • Tel.: +49(0)5085-97100-0
Fax: +49(0)5085-97100-30 • Email: info@btecsystems.de • www.btecsystems.de
IR-B06-T
Rated voltage:
Rated current:
Rated frequency:
Rated power input:
Protection class:
Degree of protection:
EN 60335-1/A2:2006
EN 60335-2-30/A2:2007
EN 50366/A1:2006
Hannover, 02.01.2020
.................................................................................
400 V
16 A
50 Hz
6300 W
I
IPX0
Advertisement
Table of Contents
