Table of Contents
Advertisement
15.12
Diagnostics connector
15.13
OCU
–
Position protection cap
using a coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
V00372-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Set kilometers or miles. (
–
Set the combination instrument. (
–
Set the clock. (
Diagnostics connector
A01255-10
1
OCU
is located under the seat.
The OCU replaces the electronic fuses and relays.
All outputs are switched depending on the signals of the voltage
regulator and ECU.
The outputs are deactivated individually in the event of overcur-
rent.
This enables easy error detection because the status of each out-
put is indicated via LED lights.
The OCU monitors the electronics system completely indepen-
dently.
W00331-10
As soon as an indicated error is rectified, the status light of the
OCU changes from red to green.
Overview
A
Ignition
B
Light
C
Brake light + horn
D
Fuel pump
E
Radiator fan
ELECTRICAL SYSTEM 15
2
and turn all the way clockwise
p. 120)
p. 24)
p. 25)
p. 25)
1
is located under the seat.
p. 119)
123
Advertisement
Table of Contents
