Table of Contents
Advertisement
–
Move the brake fluid reservoir mounted on the handlebar to a
horizontal position.
–
Remove screws
–
Take off cover
–
Manually press the brake caliper toward the brake disc to push
back the brake pistons. Ensure that brake fluid does not flow
out of the brake fluid reservoir; extract some if necessary.
Info
V01772-10
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake
pistons.
–
Remove cotter pin
linings.
–
Clean the brake caliper and the brake caliper bracket.
E00344-10
–
Check that spring plate
sliding plate
rectly.
100397-01
–
Insert the new brake linings, insert the pin, and mount the cot-
ter pins.
Info
Always change the brake linings in pairs.
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
E00345-10
1
.
2
3
with membrane
.
4
5
, pull out pin
, and remove the brake
6
in the brake caliper and brake pad
7
in the brake caliper bracket are seated cor-
BRAKE SYSTEM 13
99
Advertisement
Table of Contents
