Eizo LMM56800 Instructions For Use Manual page 52

Configuration and operation
6.8 "Layout" sidebar
Creating new windows via Drag & Drop
Sufficient free space in the layout is required as a prerequisite for this function.
Left-click a window, and instance, or an input, then drag the selected object (while holding
the button) to the open space. The new window fills the open space completely.
Changing the window size
There are two ways to change the window size:
• Click the window to be changed. The following symbols appear around the window:
, . Move the marker as needed. The window size changes. All other windows adapt
automatically to the new size. To prevent this, set individual windows with the pin.
• In the lower right-hand corner of each window a field with the current size of the window
in pixels as well as the height of the information banner (if this is shown above the win-
dow) is visible.
In this example, the width is 660 pixels, the height is 464 pixels, no information banner is
set.
Click the field and enter the values required for the horizontal and vertical position. The
information banner height cannot be changed.
Changing the window position.
There are two ways to change the window position:
• Click the window to be changed. The following symbol appears in the center of the win-
dow: . Click the symbol and drag the window to the required position. The surround-
ing windows adapt to the new position. To prevent this, set individual windows with the
pin.
• A field in each upper left corner displays the position of the window in pixels. If the infor-
mation window is displayed above the window, its height is taken into account.
52
LMM56800
Instructions for Use, 10/2019
,