Eizo LMM56800 Instructions For Use Manual page 44

Configuration and operation
6.7 "Input configuration" sidebar
Setting Description
Vertical The vertical position of the displayed image can be set down to a pixel.
position
Setting range: 0 - 100 %
Default setting: 50 %
Vertical lines that are still slightly fuzzy can be corrected using the frequency and/
Frequency /
phase or phase setting. The two parameters are automatically set as soon as an analog
picture signal is connected to the video input.
Setting range: 0 - 100 %
Auto adjust- The parameters for brightness, contrast, horizontal position, vertical position, fre-
ment quency and phase can be automatically adjusted.
To do so, a test pattern with the correct resolution must be displayed in the video
source. The test pattern can be generated by the Large Monitor Manager. Click
the "Test pattern" button.
Save the generated image on a USB memory stick.
Open the test pattern in your video source. Then click
Automatic adjustment takes place
By enabling this function a SoG (Sync on Green) signal is shown as a mono-
Monochrome
chrome signal.
Select EDID Here you can define the EDID data for the selected video. This specifies resolution
to be provided by the graphics card of the video source. You can select from the
following EDID data:
44
.
LMM56800
Instructions for Use, 10/2019