Eizo LMM56800 Instructions For Use Manual page 41

Adjust LUT at monitor output
Note
To adjust the lookup table (LUT) of the connected monitor using the Large Monitor Man-
ager, the monitor must support switching of the LUT.
To adjust the LUT for the connected monitor, proceed as follows:
1. Double-click the "Monitor 1" button in the "Input configuration" sidebar.
2. In the displayed dialog window select the required LUT.
3. Close the dialog window.
LMM56800
Instructions for Use, 10/2019
Configuration and operation
6.7 "Input configuration" sidebar
41