Eizo LMM56800 Instructions For Use Manual page 47

Setting Description
Instance enabled The currently selected instance can be disabled here so that it is no longer visi-
ble. If the instance was assigned to a window, the following symbol appears in
the window:
Default setting: "Instance enabled" is set (instance is visible)
Keep aspect ratio This property should always be enabled. The aspect ratio of the connected
video source is then retained. If this property is disabled, the aspect ratio of the
window in which the instance is displayed is used. This can result in image dis-
tortion.
Default setting: "Keep aspect ratio" is set.
Synchronize out- Enables input/output synchronization.
put
Note: If synchronization is enabled for multiple inputs, the instance with the
lowest channel number is synchronized for the video input.
Create/delete A miniature thumbnail can be created for each instance. The thumbnail ap-
pears in both the "Input configuration" (bottom) and "Instance" (top) sidebars.
miniature thumb-
nail
1.
2.
3.
4.
Keyboard/mouse Not available for LMM56800.
settings
To view only a certain part of an instance, you can define the cropping area as
Image cropping
enabled follows:
1.
2.
3.
4.
5.
Multiple instances with various cropping areas can be created.
Default setting: "Enable image cropping" is not set.
Graph optimized Not available for LMM56800.
scaling
You define whether a title (instance name) and an activated border are to be
Show title/border
displayed for the currently selected instance.
Default setting: "Show title/border" is set.
LMM56800
Instructions for Use, 10/2019
Click the button. The "Miniature thumbnail" dialog window opens.
Move the markers ,
thumbnail.
Confirm with "OK". The thumbnail is applied.
Note: Alternatively, you can load a symbol, for example from a USB stick.
Click the button.
To delete the thumbnail, click the
Enable image cropping.
Select the instance to change.
Click the button. The "Define image cropping area" dialog window
opens.
Move the markers ,
Confirm with "OK". The image cropping area is applied.
Configuration and operation
6.7 "Input configuration" sidebar
, , to select the suitable image cropping for the
button.
, , to set the requested image cropping area.
47