Table of Contents
Advertisement
8 Cleaning and check settings
8.1 Cleaning
NOTICE
Device maintenance, cleaning and disinfecting
• Make sure liquids do not seep into the device. Liquids that seep into the device may re-
sult in an electric shock or failure of the device.
• The screen is extremely sensitive to mechanical influences. Absolutely avoid scratches,
shocks, etc. for this reason.
• Clean the screen when dirty using a microfiber cloth and, if necessary, a recommended
cleaning agent. Clean the housing parts with a recommended cleaning agent.
• Use only tested disinfectants.
• If a cleaning agent is sprayed directly onto the screen surface, use a microfiber cloth to
remove drops which run down before they reach the edge of the panel.
• Remove drops of liquid from the device immediately. Contact with liquids over a longer
period can cause discoloration or allow calcium deposits to form on the surface.
Recommended cleaning agents and disinfectants
CAUTION
Use of cleaning agents and disinfectants
When handling the recommended cleaning agents and disinfectants, observe the informa-
tion in the respective safety data sheet.
Agent class
Alcohol
Aldehyde
Chlorine derivatives
Disinfectants
Glucoprotamine
Guanidine derivatives
CuratOR LX3240-MR
Instructions for Use, 06/2022
Tested cleaning agents and
disinfectants
Ethyl alcohol, 96% by vol.
Mikrozid Liquid, undiluted
Melsitt 10% by vol.
Cidex, undiluted
Terrain 0.5% by vol.
Perform 3% by weight
Morning Mist (1:64)
Terralin Protect 2% by vol.
Melisepton rapid; direct
Microbac Tissues
Incidin Plus 8% by vol.
Lysoformin 2% by vol.
Cleaning and check settings
Further examples
Hospiset cloth
Meliseptol Rapid
Isopropyl alcohol (Isopropanol), 70 %
Aldasan 2000
Kohsolin
Gigasept FF
Quartamon Med
8.1 Cleaning
35
Advertisement
Table of Contents
