Table of Contents
Advertisement
1. REMOVE TOE KICK
1
FRONT VIEW
2
PROFILE VIEW
1
2
3
UNPACKING THE FREESTANDING COOKER
Remove both screws to
detach the toe kick from the
freestanding cooker.
Lift toe kick up and rotate
towards you to remove.
3. REMOVE FROM PALLET
Remove front bolts
Remove the two shipping
bolts made visible by
removing the toe kick.
packing sheet
Remove lower guard
Unscrew the lower guard
panel from the back of
the freestanding cooker
to remove.
Remove rear bolts
Remove the two shipping
bolts made visible by
removing the lower guard.
2. REMOVE DOORS
1
HINGE DETAIL
2
PROFILE VIEW
packing sheet
restraining
strap
Open the door completely and
open the hinge locks fully on
both sides. Refer to page 13 for
more detail
Holding the door on both sides,
lift door back up to 45° and
carefully pull the door out and
away from the hinges.
IMPORTANT!
Two people required.
Before restraining the product to the
hand truck, place two cardboard packing
sheets (shipped with the product)
against both side panels as shown.
Tilt the product and insert hand truck.
DO NOT insert the hand truck to the
front of the product.
Restrain the product and packing sheets
to the hand truck using straps and tilt
onto hand truck. Set pallet aside and pull
product to the installation location.
9
Advertisement
Table of Contents
