HP 10343B Operating Manual page 9

Introduction
The HP 10343B Small Computer Systems Interface (SCSI) Bus
Preprocessor provides a complete mechanical and electrical connection
between your 8-Bit Single-Ended or Differential SCSI Bus system and the
HP 1630A/D/G or HP 1631A/D Logic Analyzer.
The HP 10343B software provides inverse assembly of activity on the
buses, and configurations for the logic analyzers. Any information about
the usage of the HP 1630A/D/G or HP 1631A/D Logic Analyzers is
supplementary to that provided in the logic analyzer operation and
programming manuals.
This manual is organized into three chapters and two appendices.
Chapter 1 covers general information such as product description and
accessories.
Chapter 2 covers the use of the HP 10343B for inverse assembly of your
SCSI Bus system. This chapter includes installation procedures and other
information specific to using the HP 10343B on the SCSI bus.
Chapter 3 contains general information about the software supplied,
including information about inverse assembler operation.
Appendix A contains product specifications, general hardware
information, and theory of operation.
Appendix B contains an overview of the Small Computer Systems
Interface (SCSI). Additional information should be obtained from the
appropriate standards organization for the SCSI Standard X3T92/86-109
Revision 2.