ISCSIDSE - Is a special application which is used when there is a
Sequential Access Device on the SCSI Bus that uses Group 0 (6 byte)
commands which communicates with a Direct Access Device that uses
Group 1 (10 byte) commands.
ISCSIAMC - Is for Automatic Media Changers.
ISCSICOM - Is for Communication Devices.
ISCSIWRM - Is a special case inverse assembler designed for Write Once
Read Multiple Devices. The following commands set it apart from
ISCSIDIR.
•
15H Mode Select
•
1AH Mode Sense
•
28H Read
•
2EH Write and Verify
•
2FH Verify
ISCSIOPT - Is for Optical Memory Devices.
Refer to chapter 3 for more information on the inverse assemblers.
Note
For Read Only Direct Access Devices, ISCSIDIR should be used
with the Group 0(6 byte) commands and ISCSIWRM should be
used with the Group 1 (10 byte) commands.
SCSI Bus Preprocessing
2-17