Wyse Winterm S10 User Manual page 64

56
Chapter 4
Use the following guidelines:
•
•
•
•
•
•
After connection initiation, the PPTP Status dialog box opens displaying messages and
allowing you to refresh or disconnect the connection.
Figure 35 PPTP Status
Use the following guidelines:
•
•
•
•
PPTP Description - Enter the descriptive name that will appear in the PPTP Manager
list of entries.
PPTP Servers - List of IP addresses or host names with optional TCP port number of
PPTP servers. Each entry with optional port number is specified as Name-or-IP:port,
where :port is optional; if not specified, port 80 is used.
Login Username, Password, and Domain - Enter the login name, password, and
domain required for this connection.
Auto-connect on system startup - When selected, causes the connection to be
made automatically on system startup. (default is cleared).
Show progress in detail - When selected, enables a PPTP Status dialog box opens
(after connection initiation and a path to an enterprise PPTP VPN server is available)
displaying messages and allowing you to refresh or disconnect the connection.
Enable MPPC - When selected, enables Microsoft Point-to-Point Compression. The
MPPC scheme is a means of representing arbitrary Point-to-Point Protocol (PPP)
packets in a compressed form. The MPPC algorithm is designed to optimize processor
utilization and bandwidth utilization in order to support a large number of simultaneous
connections. The MPPC algorithm is also optimized to work efficiently in typical PPP
scenarios (1500 byte MTU, and so on).
Message area - Displays messages as the connection is established. If this is an
interactive login connection, type appropriate responses to messages if you are
prompted (ask your network administrator for the PPTP server password and other
dialog requirements).
Data area - Displays data and statistics about the connection.
Refresh - Updates the statistics display of the connection.
Disconnect - Disconnects the connection.